The instrument is made up of optoelectric senser and controller. When the water level reaches the control point, the senser will send out the trigger signals , which will cut off the power. A test is finished through this process.
Operations ( See the panel graphs):
1 Determine the installation places of the optoelectric senser in the two measuring cylinder.
2 Discharge all the water in the cylinder in one minute.
3 Turn on the power and the electromagnetic valves will boot up and the lights will turn on, if some valves remain idle, press the boot-up button again
4 the inlet valve for 100 liters and 50 liters is the same. So when you use the valve for 50 liters, close the 100 liters, vice versa.
COMPANY PROFILE:
Ningbo Aimei Meter Manufacture Co., Ltd. covers an area of more than 18000 sq. Meters, with more than 6000 sq. Meters construction area. The company has advanced equipments, rich technical strength. The company adopts GB/T778-1996 national standard, JB/T8802-1998 industrial standard and ISO 4064 international standard to manufacture A, B grade 15mm~200mm vane wheel type, Woltman type, wet type, dry type, liquid-sealed, inversion-proof, transmitting intelligent, hot water and cold water meter, and to manufacture C, D grade 15mm, 20mm rotary piston volumetric water meter, 8mm drinking water measuring meter and plastic accessories, too, the company has formed the production line from raw material to water meter finished product, and its annual production capacity is 1, 500, 000 sets.